1 the ground below the water inlet treatment and the ground as high, and then press the center of the water outlet to draw a cross extension line.
2 Draw a crosshair along the toilet outlet to where you can see the side of the toilet.
3. Put the horse through the lower water outlet, and the crosshairs overlap.
4 Line the outside of the toilet and move the toilet.
5 put the toilet sealing flange on the ground drainage mouth, the glass glue along the drawing of the toilet integral circle line inside a circle.
6 cross overlap put the toilet, the bottom edge of the toilet is pressed on the glass glue, connected to the water hose, to install an Angle valve at the outlet of the wall, so that the water will be closed later for maintenance.
Do not use. Keep the ground dry for 24 hours.