First, you should be able to use a glue gun.
The second point: determine the width of your glue, that is, the width of the gap;
The third point: according to the width of your glue gap will glue mouth cut into a smaller aperture than the gap;
The fourth point: do a good job of protecting the gap on both sides of the glue, in the gap on both sides of the glass, profile, stone with 2-3cm adhesive paper, on both sides of the glass, profile, stone, etc. Play a protective role, but also to correct the gap inside the glue has great convenience;
Fifth: master the speed of glue and glue gun moving speed, according to the depth of the gap evenly moving glue gun;
Sixth: gluing area dressing, find a shovel knife to scrape the uneven place, glue when not into the gap;
Seventh: after 48 hours, the adhesive tape on both sides of the material can be peeled off to complete the construction.